Realme C71 RMX5303 Flash File (Firmware) Download Free [Stock ROM + Flashing Guide]

Is your Realme C71 (RMX5303) stuck on the logo, unresponsive, or locked due to FRP (Factory Reset Protection)? Flashing the official stock firmware can resolve these issues and restore your phone to its original state.

In this guide, we’ll provide a free download link for the Realme C71 RMX5303 Flash File, along with a step-by-step tutorial on how to flash it safely. Whether you’re dealing with software corruption, forgotten passwords, or malware issues, this firmware will help you revive your device.

About Realme C71 RMX5303

Before we jump into flashing, let’s look at the Realme C71’s technical specifications. It’s powered by the Unisoc T7250 (12nm) chipset and comes in 4GB and 8GB RAM variants. It packs a large 6300mAh battery with 45W fast charging, runs on Realme UI 6 based on Android 15, and features 128GB internal storage with a dedicated microSD card slot. It’s a performance-packed budget phone, but like any device, software issues can occur.

Why Flash Realme C71 RMX5303?

Flashing the stock firmware can solve many software-related issues:

• ✅ Fix boot loop (stuck on Realme logo)
• ✅ Remove pattern or password locks
• ✅ Bypass FRP (Factory Reset Protection)
• ✅ Restore device to factory state
• ✅ Solve lagging, crashing, or freezing issues

Important: Always use the correct flash file matching your device version. To verify, dial *#899# in the emergency dialer.

Download Realme C71 RMX5303 Flash File (Firmware)

Here is the official stock ROM download for the Realme C71:

• Model: Realme C71 (RMX5303)
• File Name: RMX5303export_15_C.02_2025050722353100
• File Size: 26GB
• Android Version: Android 15 (Realme UI 6)
• Chipset: Unisoc T7250 (12 nm)
• Download Link: ⬇️ Click Here to Download

This file has been tested and verified for safety. Ensure your internet connection is stable due to the file’s large size.

Pre-Requisites Before Flashing

Before proceeding, make sure you meet the following requirements:

• ✅ A Windows PC/Laptop (Firmware flashing is not supported on Mac).
• ✅ Original USB Cable (To avoid connection issues).
• ✅ Oplus USB Drivers (Required for device recognition).
• ✅ Oplus Download Tool (Official flashing software).
• ✅ Backup Important Data (Flashing erases all data).
• ✅ At Least 50% Battery (Prevents shutdown during flashing).

How to Install Stock Firmware on Realme C71 RMX5303

Step 1: Download Firmware & Tools

1. Download the Realme C71 RMX5303 Flash File from the link above.
2. Extract the ZIP file on your PC.
3. Install Oplus USB Drivers (Download from Realme’s official site).
4. Download and extract the Oplus Download Tool.

Step 2: Flash Firmware Using Oplus Tool

1. Open Oplus Download Tool and log in (requires authorized credentials).
2. Click “Import” and select the extracted firmware folder.
3. Power off your Realme C71.
4. Hold Volume Up + Volume Down buttons and connect the phone to the PC.
5. The tool will detect the device automatically.
6. Click “Start” to begin flashing.
7. Wait until the process completes (do not disconnect the phone).

Step 3: Reboot Your Device

Once flashing is done, disconnect the phone and power it on. The first boot may take a few minutes.

⚠️ Flashing Warning & Disclaimer

• Flashing firmware will erase all user data. Backup your data before proceeding.
• This guide is for educational purposes only. We are not responsible for any damage or loss caused during the process.
• If you’re unsure, seek help from a professional mobile technician.

Conclusion

Flashing the Realme C71 RMX5303 Flash File (Firmware) is an effective solution for unbricking your device, removing screen locks, or restoring the system to stock. With the official stock ROM, proper tools, and step-by-step guidance, you can revive your Realme phone in no time.

Related Post

• Realme C61 Flash File (RMX3930, RMX3933)
• Realme 5 RMX1911 Flash File
• Realme C63 Flash File (RMX3939 RMX3939)

FAQs